Engineered for the load · Built for industry

Your Load Is Specific. So Is The Solution.

We design the equipment that works between the crane hook and the load. A coil tong, a tilter, and a lifting beam lift, turn, and carry a coil, a mold, or a long load.

Explore Products Describe Your Project
  • Below-the-hook equipment
  • Tilting and turning
  • Crane power supply
Yellow HENDL coil tong and coil upender, front angle, transparent background

Products

Coil Tong, Coil Upender And Lifting Beams

The ranges below are standard capacities. The size of each load, the crane, and the working conditions are settled in the quote.

Yellow HENDL coil tong, front view, transparent background

Coil Tong

Grips a horizontal steel or metal coil with the arms. A narrow arm lets coils be stored close together. The pad on the contact face keeps the coil from being crushed.

  • Lifting capacity is up to 50 metric tonnes. Coil width is 300–2,200 mm.
  • The arms close only at the coil center and do not open under load. Control is remote. Motorized rotation is optional.
Product page Request a quote for this product
Yellow HENDL coil upender, side view, transparent background

Coil Upender

Turns a coil, a sheet coil, wire, a paper bale, a pallet, or a mold in place. The tilt is not left to the overhead crane. The unit runs when it is powered.

  • The electric family’s standard capacity is up to 40 t.
  • The tilt can be 90° or 180°.
  • Remote control and an inverter soften the start and the stop. A light curtain, an end sensor, and audible and visual alarms are stated for this family.
Product page Request a quote for this product
Yellow HENDL adjustable lifting beam, front view, transparent background

Lifting Beams

Lifts a long or wide load from two or more points. A lifting beam is loaded in bending from below. A spreader beam opens the suspension to both ends and loads the beam in compression. A rotating beam turns the load about its own axis.

  • Adjustable and hook lifting beams are up to 200 t. The span can be fixed or adjustable.
  • The motorized beam is up to 100 t. It positions the load through 0–360°, and rotation speed is set for the project.
Product family Request a quote for this product

Eight Product Families

01 — Coil And Roll Lifting The C-hook is built up to 50 t, to the coil width. The manual handwheel horizontal tong is marked 2.5 t, and the wire coil, wire rod and coil lifter is marked 1,000 kg. The inner lifter’s standard capacity is up to 3 t, and its mandrel is 3–6 in. 02 — Lifting And Spreader Beams Adjustable and hook lifting beams are up to 200 t. The motorized beam is up to 100 t and positions the load through 0–360°. 03 — Plate, Slab And Long Product Slab tong 5–150 t. Mechanical mobile slab tong with padded scissors and a center table. Roll lifter 0–40 t. 04 — Concrete, Stone And Precast Block grab 3 t and 150–1100 mm. Segment tong 0–30 t. Natural stone’s standard capacity is 5 t, and the panel’s standard capacity is up to 10 t. 05 — Tilting And Turning Electric tilting up to 40 t, at 90° or 180°. Hydraulic tilting 0–100 t and 90°. 180° mold tilting up to 60 t. 06 — Industrial Transfer Cars The transfer car and coil upender is 1–32 t and up to 10 km/h. A flat-platform rail car is designed to the load and the rail. 07 — Special Lifting Container spreader up to 45 t. Side drum lifter 0–1 t. The pallet lifter hangs from the crane hook. 08 — Crane And Power Supply Fully enclosed and semi-enclosed conductor bar, 40–200 A. Cable trolley and cable reel. Process cranes for anodizing, chromate, and cataphoresis lines.

Tonne and millimetre ranges are the standard capacity of the product they belong to. A load outside that limit is designed as its own equipment.

Product finder

What Do You Need To Lift?

A short guide for someone who does not know the product name. The result shows the families to review.

This is not an engineering decision or a guaranteed product choice. Capacity, load geometry, the crane, and the working conditions are reviewed by the technical team.

Sectors

Applications By Load Group

  • Steel And Metal

    Lifting and tilting of coil, sheet coil, plate, slab, and long product.

  • Paper And Coil Lines

    Lifting equipment for paper, plastic coil, and reels.

  • Concrete And Precast

    Lifting of concrete block, stone panel, tunnel segment, and panelton. The block model is 3 t, and the segment family is 0–30 t.

  • Port And Container

    Container lifting equipment is treated as its own product family.

  • General Manufacturing

    Mold tilting, drum, pallet, and equipment built for a specific load.

Custom solutions

Engineering For The Customer

  1. Describe The Load

    Load type, the operation, and the working conditions go into the quote request.

  2. The Application Is Reviewed

    Sales and engineering see the request together.

  3. The Solution Is Designed

    If a standard family is not enough, the equipment is designed for the application.

  4. The Quote Is Prepared

    Scope and the delivery plan are written into the quote after the technical review.

References

References

  • ABB
  • ADOPEN
  • AKPA Alüminyum
  • ASAŞ
  • Assan Alüminyum
  • Ateş Wind Power
  • Bakioğlu Holding
  • Besler
  • Borusan Holding
  • Burak Galvaniz
  • elba
  • ENPAY
  • Erdemir
  • Gencer
  • KBS
  • Marcegaglia Specialties
  • OMTAŞ
  • Schmitz Cargobull
  • Schneider Electric
  • Şişecam
  • Sistem Alüminyum
  • Sütaş
  • Tosçelik
  • Umur
  • Vestel
  • Yapı Merkezi
  • Yemtar
  • Yücel Boru ve Profil

Resources

Technical Resources

What The Quote Asks

Name, company, work email, phone with country code, country, and a short description of the load and the need. Coil size, crane type, and a file are asked at the next step.

Work Under The Hook

Building a crane and choosing the equipment under the hook are separate jobs. HENDL selects or redesigns the part between the load and the lifting group for that load.

Product Pages

The ranges on the product pages are standard capacities. The size is settled in the quote.

About

Engineering Around Your Load.

HENDL develops engineering solutions for industrial lifting and material handling operations.

Our expertise covers below-the-hook lifting equipment, coil handling systems, C-hooks, lifting beams, and custom-engineered lifting attachments.

By understanding the unique requirements of each application, we bring together safety, functionality, and operational efficiency.

Our priority is not simply to lift a load, but to handle it safely with the right solution.

Quote

Describe Your Project